The R-300 meets the highest expectations in convenience and versatility. Its modular design allows extension of the Rotavapor® R-300 to a fully integrated system where a central interface regulates each component.


Benefits

Convenient

  • Comfortable flask and vapor duct removal thanks to easy to use Combi-Clip
  • User-friendly operation due to ergonomic electric or manual lift
  • Immediate adjustment of heating temperature and rotation speed with intuitively positioned control knobs

Extendable and versatile

  • Easy plug & play extension to a fully integrated system including a central interface, vacuum pump and recirculating chiller according to your needs
  • Choice between 5 L high-temperature and 1 L fast-heating bath
  • Wide range of beneficial accessories available: seven different glass assemblies, safety shield, lid for heating bath, automatic distillation and automatic foam detection

Reproducible

  • Precise operation control with integrated digital display of heating temperature, rotation speed and lift position
  • Traceability of all process parameters including data recording and charting with the optional Interface I-300 Pro
  • Instant alert with push notification on mobile devices in case of process deviation (with Interface I-300 / I-300 Pro only)

Features

Ergonomic handle

Ergonomic handle to conveniently change the position of the lift. Electronic and manual version available.

Combi-Clip

The patented Combi-Clip with snap lock mechanism allows connection of the evaporating flask with one hand.

Direct rotation speed control

Immediate adjustment of rotation speed with intuitively positioned control knob in case of an urgent or unexpected event.

Integrated display

The heating bath temperature, rotation speed and lift position are shown on the integrated heating bath display.

Additional interface

Control and regulate all process parameters conveniently with the optional Interface I-300 or I-300 Pro.

Glass

Glass assemblies

Seven different glass assemblies enable a wide range of applications, solvents and sample properties.

Where is the rotation speed displayed?

The rotation speed, as well as heating bath temperature and lift position, are shown on the integrated bath display. When using an interface those parameters are shown on both the bath and the interface.

Why should I buy plastic coated glassware?

P+G Receiving flask

The transparent plastic coating (P+G) improves the durability and stability of the glass. It also protects the operator from broken bits of glass as well as chemicals in case of glass breakage.

How do I determine the optimum evaporation conditions?

The easiest way for finding the right conditions is by applying the “delta 20 rule”:

  • Heating bath temperature should be 20 degrees higher than the boiling point of the solvent to be evaporated at the vacuum chosen
  • Cooling temperature should be at least 20 degrees lower than the boiling temperature of the solvent

A bath temperature of 50 °C is recommended for many applications.

Example:

  • 50 °C heating bath temperature
  • 30 °C boiling temperature (by adjusting the vacuum)
  • < 10 °C cooling temperature

There are many advantages of heating the bath to a maximum of 50 °C:

  • No risk of scalding when handling the evaporation flask
  • Lower evaporation of heating liquid (e.g. water)
  • Higher energy efficiency compared to other heating bath temperatures

Is the selection of the right condenser important?

The selection of the right condenser is crucial to be able to perform the required application. Depending on the required condensation level a different cooling capacity needs to be chosen.

Which liquid should be used in the heating bath?

Tap water is the most common used fluid. When using distilled water, 0.5 g of Borax should be added. Distilled water without any additionally added ions will corrode the bath. For heating temperatures higher than 95 °C we recommend polyethyleneglycol (PEG).

Can I reduce the energy consumption of the evaporation system?

Yes, the ECO-mode is an integral part of the BUCHI Rotavapor R-300 system. Both bath and chiller enter a stand-by more after a pre-defined period of time and are restarted automatically when required.

Why are there some condensate droplets on the diaphragm?

If the distillation parameters are not chosen according to the "delta 20 rule" (10-30-50), the condensation is not complete and vapor is entering into the pump. Due to the high vacuum in the second stage, the vapor may condensate, leading to droplets. Thus, the pressure has to be increased or the cooling temperature of the condensation assembly decreased.

Distillation banner

E: care@invitro.com.au
P: 1300 552 003