The Carbolite Gero STF single zone and TZF 3-zone high temperature tube furnace range is available at 1500 °C and 1600 °C with both models using silicon carbide heating elements.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item. The work tube length is dependent on the application eg for use with modified atmosphere or vacuum.

The TZF 3-zone high temperature tube furnace has heated lengths of 450 and 610 mm. An extended uniform zone in the mid-section of the work tube is achieved with the use of end zone controllers which track the centre zone temperature and compensate for the loss of heat from the tube ends.


Standard features

  • 1500°C & 1600°C maximum operating temperatures
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • Accepts work tubes up to 60 or 90 mm outer diameter depending on model
  • Heated lengths, single zone 180, 450 or 610 mm (STF)
  • Heated lengths, 3-zone 450 or 610 mm (TZF)
  • Silicon carbide heating elements
  • Horizontal configuration

Options (specify these at time of order)

  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • Alternative mounting options are available
  • Optionally configured for 2 phase or 3 phase electrical supply (depending on model)
  • A range of additional work tubes and end seals or work tube packages are available
  • Wide choice of tube diameters and materials is available: eg quartz, ceramic, metal
  • Insulation plugs & radiation shields to prevent heat loss & improve uniformity
  • Control module with 2 meter conduit to furnace (TZF)
  • Hook and strap work tube support

P: 1300 552 003